The Ford Barn

Y-Blockhead · 10-19-2015, 11:36 PM

Saw on ebay, thought I would share the chuckle...

http://www.ebay.com/itm/Vintage-Ford...BWJbor&vxp=mtr

Dave Mellor NJ · 10-19-2015, 11:39 PM

They're not even rods.

RUNNERBUN · 10-19-2015, 11:59 PM

I think with a bit of use of my 2lb hammer and a side grinder I could get that rod to work again and then relist it on fleabay with a huge mark-up and make some serious Dollars. (I'm off to place my bid)

Poor misguided fool!!!!

James Rogers · 10-20-2015, 06:43 AM

I have a 5 gallon bucket of that stuff I would sell for 10$.

pat59 · 10-20-2015, 11:34 AM

Man what a smokin' hot deal!

CarlG · 10-20-2015, 11:40 AM

Sponsored Links (Register now to hide all advertisements)

Sad thing is that for $10, someone will probably buy it!

Tom Wesenberg · 10-20-2015, 01:59 PM

That's a cool sculpture, and that's why I also save junk parts like this. Someday someone can turn them into art.

Jwilli · 10-20-2015, 04:45 PM

I have some in my junk box that are a lot nicer.

Rowdy · 10-20-2015, 05:12 PM

I have hauled several buckets of junk like that with my scrap iron. Can not think of anything else to do with it. If this junk sells I will change my disposal technique and sell it on ebay. Rod

10-19-2015, 11:36 PM	#1
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 5,849	Anybody need some rods and springs... Saw on ebay, thought I would share the chuckle... http://www.ebay.com/itm/Vintage-Ford...BWJbor&vxp=mtr

10-19-2015, 11:39 PM	#2
Dave Mellor NJ Senior Member Join Date: May 2010 Posts: 781	Re: Anybody need some rods and springs... They're not even rods.

10-19-2015, 11:59 PM	#3
RUNNERBUN Senior Member Join Date: Nov 2011 Location: Queensland Australia Posts: 640	Re: Anybody need some rods and springs... I think with a bit of use of my 2lb hammer and a side grinder I could get that rod to work again and then relist it on fleabay with a huge mark-up and make some serious Dollars. (I'm off to place my bid) Poor misguided fool!!!! __________________ Adjust your points with gentle blows of a 2 pound hammer

10-20-2015, 06:43 AM	#4
James Rogers Senior Member Join Date: May 2010 Location: Asheville,NC Posts: 3,104	Re: Anybody need some rods and springs... I have a 5 gallon bucket of that stuff I would sell for 10$. __________________ http://www.model-a-ford-4bangers.com/

10-20-2015, 11:34 AM	#5
pat59 Member Join Date: Sep 2013 Location: Phila Pa Posts: 66	Re: Anybody need some rods and springs... Man what a smokin' hot deal!

10-20-2015, 11:40 AM	#6
CarlG Senior Member Join Date: Nov 2010 Location: Anchorage, Alaska Posts: 9,115	Re: Anybody need some rods and springs... Sponsored Links (Register now to hide all advertisements) Sad thing is that for $10, someone will probably buy it! __________________ Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club

10-20-2015, 01:59 PM	#7
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Anybody need some rods and springs... That's a cool sculpture, and that's why I also save junk parts like this. Someday someone can turn them into art.

10-20-2015, 04:45 PM	#8
Jwilli Senior Member Join Date: Apr 2014 Location: Kennesaw, Ga Posts: 511	Re: Anybody need some rods and springs... I have some in my junk box that are a lot nicer.

10-20-2015, 05:12 PM	#9
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Anybody need some rods and springs... I have hauled several buckets of junk like that with my scrap iron. Can not think of anything else to do with it. If this junk sells I will change my disposal technique and sell it on ebay. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!