Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-24-2015, 09:43 AM   #1
Dennis Pereira
Senior Member
 
Dennis Pereira's Avatar
 
Join Date: May 2010
Location: Georgetown Divide Kelsey ca
Posts: 868
Default Oil Leak

My engine is already marking its spot still hanging on my hoist . After adding oil I noticed a small puddle and thought the drain plug was leaking so I tightened and wiped the pan off and watched another drop form . There's a pin hole in the pan better now than when installed .
__________________
Dennis in Kelsey ca
Dennis Pereira is offline   Reply With Quote
Old 04-24-2015, 10:20 AM   #2
rocket1
Senior Member
 
Join Date: Mar 2014
Location: Midland Park,N.J.
Posts: 1,108
Default Re: Oil Leak

Sponsored Links (Register now to hide all advertisements)
if it is rusted from the inside you should remove the pan and braze it up.stick an awl in the pin hole if it goes through easily and the hole get much bigger it is a rust spot inside the pan.
rocket1 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:28 PM.