The Ford Barn

joesjalopies · 02-24-2022, 11:13 AM

building 36 Cabriolet with stock boxed X frame and in floor master cylinder and hydraulic clutch, plus 5 speed manual tranny. need advise on which mufflers will fit. If possible sounfing like a mustang. email to [email protected] or call joe at 252-336=4199. must say your name for call to go thru.

tubman · 02-24-2022, 07:09 PM

I hope you mean a P51.

V8COOPMAN · 02-25-2022, 01:39 AM

Quote:

Originally Posted by tubman

I hope you mean a P51.

Ha....Ain't no stinking mufflers on a P-51! DD

cas3 · 02-25-2022, 01:46 AM

That's beautiful DD

corvette8n · 02-25-2022, 12:54 PM

https://www.thrushexhaust.com/hear-it-sounds-of-thrush/
You didn’t say what motor your running but mufflers come in all lengths/shapes/sizes. I know several on this forum that don’t run any mufflers with a Flathead and it sounds sweet.

woodiewagon46 · 02-25-2022, 08:44 PM

Sponsored Links (Register now to hide all advertisements)

Find someone with a Walker Muffler master catalog and you have dozens to choose from. Every length, width, height, pipe size and inlet and exit location is listed.

02-24-2022, 11:13 AM	#1
joesjalopies Member Join Date: Feb 2012 Location: Shiloh NC Posts: 80	need help with 36 x frame building 36 Cabriolet with stock boxed X frame and in floor master cylinder and hydraulic clutch, plus 5 speed manual tranny. need advise on which mufflers will fit. If possible sounfing like a mustang. email to [email protected] or call joe at 252-336=4199. must say your name for call to go thru.

02-24-2022, 07:09 PM	#2
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 10,320	Re: need help with 36 x frame I hope you mean a P51.

02-25-2022, 01:46 AM	#4
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,578	Re: need help with 36 x frame That's beautiful DD

02-25-2022, 12:54 PM	#5
corvette8n Senior Member Join Date: Jul 2010 Location: 36 miles north of Albany NY Posts: 2,954	Re: need help with 36 x frame https://www.thrushexhaust.com/hear-it-sounds-of-thrush/ You didn’t say what motor your running but mufflers come in all lengths/shapes/sizes. I know several on this forum that don’t run any mufflers with a Flathead and it sounds sweet.

02-25-2022, 08:44 PM	#6
woodiewagon46 Senior Member Join Date: Jun 2012 Location: Long Island,NY Posts: 1,555	Re: need help with 36 x frame Sponsored Links (Register now to hide all advertisements) Find someone with a Walker Muffler master catalog and you have dozens to choose from. Every length, width, height, pipe size and inlet and exit location is listed.