The Ford Barn

36 conv sedan · 02-10-2017, 09:48 PM

Hi guys:

I am looking for the following items to complete my set of 1936 Ford tools:

- Tire iron. 68-17019. 12" long with square hole and one end curved into a flat end to remove hubcaps

- Tire pump. I understand two models could have been used, B-17052-A1 y B-17052-A2... any of them would do fine.

Anybody has some extras that could sell? If so, conctact me directly please at: vmilke at nutryplus dot com

Thanks,
victor

JM 35 Sedan · 02-10-2017, 11:13 PM

Lin Stacey, Early Ford V-8 Club adviser for V-8 Tools, also sells show tools and tool kits for the Early Ford V-8's. LinStacey@sbcglobal(dot)net

☆Note: to use email above replace (dot) with an actual • in email address given

A bones · 02-10-2017, 11:22 PM

Don't know where you live. But give this guy a shout. Look at the swap meet here ( Early V8 or Model A ) Page thru 'til you see Chuck Kuntz.. Click on his name, send him a Personal message with your needs. Give him time to look, chances are he'll be able to locate them.

36 conv sedan · 02-11-2017, 11:21 AM

Thanks! I have been in contact with Lin before. I got some tools from him off ebay. Great guy. Good idea I will contact him. If he does not have them, I will look for Chuck.

Thanks again!
victor

Chuck Kuntz · 02-11-2017, 11:32 AM

Probably have the tire iron. I will look today and get a photo if I do.
Chuck

36 conv sedan · 02-11-2017, 11:35 AM

Sponsored Links (Register now to hide all advertisements)

Great Chuck, thanks!

If you do, contact me directly at: vmilke at nutryplus dot com

Victor

02-10-2017, 09:48 PM	#1
36 conv sedan Member Join Date: Feb 2012 Posts: 95	Looking for 1936 Ford tire iron and air pump Hi guys: I am looking for the following items to complete my set of 1936 Ford tools: - Tire iron. 68-17019. 12" long with square hole and one end curved into a flat end to remove hubcaps - Tire pump. I understand two models could have been used, B-17052-A1 y B-17052-A2... any of them would do fine. Anybody has some extras that could sell? If so, conctact me directly please at: vmilke at nutryplus dot com Thanks, victor

02-10-2017, 11:13 PM	#2
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Looking for 1936 Ford tire iron and air pump Lin Stacey, Early Ford V-8 Club adviser for V-8 Tools, also sells show tools and tool kits for the Early Ford V-8's. LinStacey@sbcglobal(dot)net ☆Note: to use email above replace (dot) with an actual • in email address given __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

02-10-2017, 11:22 PM	#3
A bones Senior Member Join Date: May 2010 Location: CLAYTON DE Posts: 1,283	Re: Looking for 1936 Ford tire iron and air pump Don't know where you live. But give this guy a shout. Look at the swap meet here ( Early V8 or Model A ) Page thru 'til you see Chuck Kuntz.. Click on his name, send him a Personal message with your needs. Give him time to look, chances are he'll be able to locate them. __________________ Enjoy yer day. Tom Hate can't fix what it started.

02-11-2017, 11:21 AM	#4
36 conv sedan Member Join Date: Feb 2012 Posts: 95	Re: Looking for 1936 Ford tire iron and air pump Thanks! I have been in contact with Lin before. I got some tools from him off ebay. Great guy. Good idea I will contact him. If he does not have them, I will look for Chuck. Thanks again! victor

02-11-2017, 11:32 AM	#5
Chuck Kuntz Senior Member Join Date: May 2010 Posts: 13,692	Re: Looking for 1936 Ford tire iron and air pump Probably have the tire iron. I will look today and get a photo if I do. Chuck

02-11-2017, 11:35 AM	#6
36 conv sedan Member Join Date: Feb 2012 Posts: 95	Re: Looking for 1936 Ford tire iron and air pump Sponsored Links (Register now to hide all advertisements) Great Chuck, thanks! If you do, contact me directly at: vmilke at nutryplus dot com Victor