Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-27-2016, 07:54 PM   #1
Joe31
Senior Member
 
Joe31's Avatar
 
Join Date: Dec 2013
Location: Port Jervis/Greenville
Posts: 208
Default winfield head

Does anyone know what plug i should use. Its a winfield alum. head with C5 352 stamped in it. The head is flat and also the pistons are flat. thats about all i know about it. thanks joe
Joe31 is offline   Reply With Quote
Old 05-27-2016, 10:38 PM   #2
billy myers
Member
 
Join Date: Oct 2013
Location: east granby conn.
Posts: 70
Default Re: winfield head

I use a champion c 16 on a winfield red head
billy myers is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-28-2016, 04:17 AM   #3
Juggler
Senior Member
 
Juggler's Avatar
 
Join Date: Aug 2010
Location: Phoenix AZ/Bath UK
Posts: 481
Default Re: winfield head

I use an NGK BPR6ES in my ali Winfield head (no flycut)
Juggler is offline   Reply With Quote
Old 05-28-2016, 10:50 AM   #4
Jim Brierley
Senior Member
 
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,066
Default Re: winfield head

Judging by the number, yours is an aftermarket head so it could have either 14mm or 18mm plugs. With higher compression, a somewhat colder than stock plugs are recommended.
Jim Brierley is offline   Reply With Quote
Old 05-28-2016, 04:53 PM   #5
wensum
Senior Member
 
wensum's Avatar
 
Join Date: Apr 2011
Location: New Zealand
Posts: 444
Default Re: winfield head

Sponsored Links (Register now to hide all advertisements)
The NGK BPR6ES was recommended by Reds Headers who supplied my Winfield head and so far that have proven reliable.
Keith

Last edited by wensum; 05-28-2016 at 04:54 PM. Reason: spelling error
wensum is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:40 AM.