|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
04-22-2024, 11:04 PM | #1 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,848
|
Lincoln pinion backlash
I'm in the process of setting up a Lincoln [hypoid] rear end. I'm quite familiar with how to set up a banjo rear, having done numerous Fords over the years, but I don't know the specs for backlash between ring and pinion for a Lincoln. Does anyone have the specs? [measured at the spline]. Thank you!
__________________
Unfortunately, two half wits don't make a whole wit! |
04-23-2024, 12:48 PM | #2 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 3,274
|
Re: Lincoln pinion backlash
I have it written down with other notes and bearing and pinion seal number from when I rebuilt my 39 Zephyr rear axle. . I’m away from the shop now but maybe later this afternoon.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-24-2024, 04:18 PM | #3 |
Senior Member
Join Date: May 2010
Location: albany
Posts: 468
|
Re: Lincoln pinion backlash
Think those parts came as an assembled pinion/ housing and ring gear so no specs were published. At least none ive been able to find. I would say tooth contact pattern is more important than lash with those
|
05-02-2024, 02:59 PM | #4 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 3,274
|
Re: Lincoln pinion backlash
I finally found the information I was looking for.
|
05-02-2024, 05:04 PM | #5 |
Senior Member
Join Date: May 2015
Posts: 8,371
|
Re: Lincoln pinion backlash
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
05-02-2024, 09:13 PM | #6 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,848
|
Re: Lincoln pinion backlash
Sponsored Links (Register now to hide all advertisements)
__________________
Unfortunately, two half wits don't make a whole wit! |
05-02-2024, 11:38 PM | #7 |
Junior Member
Join Date: Apr 2024
Posts: 12
|
Re: Lincoln pinion backlash
I've finally located the data I was searching for.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|