The Ford Barn

Gary WA · 09-10-2023, 01:21 PM

Anyone do restoration of these motor meters?

Ray in La Mesa · 09-10-2023, 09:16 PM

Sponsored Links (Register now to hide all advertisements)

I had Williamsons Instruments repair 3 of the "Redball" meters some years ago. They are difficult to do as the working pressure in the bulb is 90-100 lbs as opposed to 9-10 lbs in the normal meters so they are expensive (if they can be repaired). Mine were $250 each repair! I don't know if they are still doing them. I'm out on vacation right now so can't supply you with contact info. Good luck.

09-10-2023, 01:21 PM	#1
Gary WA Senior Member Join Date: May 2010 Location: Clinton,WA/Whidbey Island Posts: 4,118	motor meter restorations Anyone do restoration of these motor meters? __________________ www.whidbeymodelaclub.com Last edited by Gary WA; 12-30-2023 at 02:35 PM.

09-10-2023, 09:16 PM	#2
Ray in La Mesa Senior Member Join Date: May 2010 Location: La Mesa Ca Posts: 1,169	Re: motor meter restorations Sponsored Links (Register now to hide all advertisements) I had Williamsons Instruments repair 3 of the "Redball" meters some years ago. They are difficult to do as the working pressure in the bulb is 90-100 lbs as opposed to 9-10 lbs in the normal meters so they are expensive (if they can be repaired). Mine were $250 each repair! I don't know if they are still doing them. I'm out on vacation right now so can't supply you with contact info. Good luck.