02-06-2020, 02:37 PM | #1 |
Member
Join Date: Sep 2014
Posts: 63
|
Gauge Wire
I converted my 29 coupe to 12 alt, 60amp, neg ground. I would like to replace the battery cable to the starter with 2 gauge cable instead of the 1 gauge cable that ford used for the 6 volt system? Will the amp draw to the starter be too much for the 2 gauge cable verses the 1 gauge cable. Anyone have experience with using 2 gauge cable?
|
02-06-2020, 06:05 PM | #2 |
Senior Member
Join Date: Aug 2016
Location: West Virginia
Posts: 430
|
Re: Gauge Wire
The current should be less at higher voltage, so you should be able to get by with smaller cable, in theory at least.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-06-2020, 06:42 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,440
|
Re: Gauge Wire
12-volt can generally always use 1 less normal American wire gauge size than a 6-volt system. It doesn't hurt to use the larger but you just don't want to go too small. It all depends on the current flow required in the particular circuit in question. With 12-volt, it will be even more important to have each accessory circuit fused. The only exception are circuits that are intermittent.
|
02-06-2020, 06:58 PM | #4 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Gauge Wire
You didn't say if you converted the starter to 12v. If you haven't, a smaller cable and as long as possible will drop the voltage to the starter a bit and help it survive the higher voltage for longer. The same for the earth cable. I used a very small and long cable from a small Japanese car for both power and earth on mine and could still go further. I bought them from a wrecker's yard. The starter in a Model A doesn't draw very much, neither do some of those small cars and look at how small their cables are.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
02-07-2020, 12:44 AM | #5 |
Senior Member
Join Date: Jun 2017
Location: Walla Walla, WA
Posts: 1,045
|
Re: Gauge Wire
Why not just stay with the larger gauge? Less work in the long run.
|
02-07-2020, 03:47 AM | #6 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Gauge Wire
Sponsored Links (Register now to hide all advertisements)
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
02-07-2020, 10:38 AM | #7 | |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,145
|
Re: Gauge Wire
Quote:
As Synchro909 mentions, smaller, longer cables will increase resistance and lower current, but not that much unless they are very small and very long, and well insulated and ventilated. Extra resistance will also decrease battery charge. |
|
02-07-2020, 11:37 AM | #8 |
Member
Join Date: Sep 2014
Posts: 63
|
Re: Gauge Wire
I am adding a cutoff switch and will use the #1 cable from the battery to the switch and #2 cable to the starter, #2 cable is cheap and local. I have not converted starter to 12V, how difficult is that?
|
02-07-2020, 06:30 PM | #9 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,440
|
Re: Gauge Wire
Only the fields need to be changed since they don't need as many windings in the field as the old 6-volt stuff did. The armature would still be OK. The 6-volt starter will just turn faster but I doubt if it would hurt it unless the engine had problems where a person might run it too long and overheat it. A person should let any starter cool off after running it a good bit no matter what the voltage is.
|
02-08-2020, 10:40 AM | #10 | |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,145
|
Re: Gauge Wire
Quote:
I think the vendors sell the coils preassembled for 12V. |
|
02-14-2020, 04:04 PM | #11 |
Senior Member
Join Date: May 2010
Location: Hendersonville TN
Posts: 180
|
Re: Gauge Wire
I am of the school that runs 12 volts into the 6 volt model A starter, but I do not use the old style Bendix. I used to run 36 volts into the 12 starter to fire up the Rear Engine Dragster for years without a problem.
__________________
Steve - Santa Rosa |
|
|
Sponsored Links (Register now to hide all advertisements) |
|