The Ford Barn

wrndln · 06-17-2014, 07:45 PM

I have a question about pickup/AA headlights. Pickup headlight buckets were painted black verses nickel plated like passenger cars for 28/29 AA trucks and pickups. The question I have is: Are the 6 rivet heads painted black with the rest of the bucket or were they installed after the buckets were painted and thus left cad plated. Three of the 6 rivets I am referring to as shown in the picture below. Note the internal bracket ball is painted black in the picture which is not right (will mostly insulate the headlight, so the wiring may not work well), so the painted rivets are suspect for the headlight in the picture. I can't find the answer in the Judging Guideline's. Thanks for any helpful information.
Rusty Nelson

Dan Partain · 06-18-2014, 02:03 AM

Rusty, the buckets were dipped in black before the plated internal parts were assembled to them. The rivets were cad plated, you can see the cad plating on the rivets and other parts in this photo. The outside of the rivet doesn't show any sign of the cad plating at this point, just a little surface rust, no paint.

wrndln · 06-18-2014, 08:14 AM

Dan,
Thanks for the help as always. You always come through on pickup questions. I probably should have emailed you directly about the question. I don't seem to get much help on Fordbarn anymore. It seems like many knowledgeable people have left or don't want to post responses. I kind of suspected the bucket was painted first before the other parts were installed, but wasn't sure.
Thanks again for the help.
Rusty Nelson

30ccpickup · 06-18-2014, 11:20 AM

QUOTE=wrndln;896102]Dan,
Thanks for the help as always. You always come through on pickup questions. I probably should have emailed you directly about the question. I don't seem to get much help on Fordbarn anymore. It seems like many knowledgeable people have left or don't want to post responses. I kind of suspected the bucket was painted first before the other parts were installed, but wasn't sure.
Thanks again for the help.
Rusty Nelson[/QUOTE]

Rusty, I just benefitted from your question. Please keep posting them here.

Paul

Dan Partain · 07-07-2014, 11:57 AM

I took a photo of one of my headlights I restored in the 70's, it's still in pretty decent shape.

Steve Plucker · 07-07-2014, 08:08 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Dan Partain

Rusty, the buckets were dipped in black before the plated internal parts were assembled to them. The rivets were cad plated, you can see the cad plating on the rivets and other parts in this photo. The outside of the rivet doesn't show any sign of the cad plating at this point, just a little surface rust, no paint.

Dan,

Excelent example of an original, unmolested bucket!

Thanks.

Pluck

BlueSunoco · 07-08-2014, 11:42 AM

I learned something new here today also. Your post was/is much appreciated.

Pinstripe · 07-09-2014, 07:47 AM

Quote:

Originally Posted by BlueSunoco

I learned something new here today also. Your post was/is much appreciated.

ditto!

06-17-2014, 07:45 PM	#1
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,165	Pickup headlight question I have a question about pickup/AA headlights. Pickup headlight buckets were painted black verses nickel plated like passenger cars for 28/29 AA trucks and pickups. The question I have is: Are the 6 rivet heads painted black with the rest of the bucket or were they installed after the buckets were painted and thus left cad plated. Three of the 6 rivets I am referring to as shown in the picture below. Note the internal bracket ball is painted black in the picture which is not right (will mostly insulate the headlight, so the wiring may not work well), so the painted rivets are suspect for the headlight in the picture. I can't find the answer in the Judging Guideline's. Thanks for any helpful information. Rusty Nelson Last edited by wrndln; 06-17-2014 at 08:18 PM.

06-18-2014, 08:14 AM	#3
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,165	Re: Pickup headlight question Dan, Thanks for the help as always. You always come through on pickup questions. I probably should have emailed you directly about the question. I don't seem to get much help on Fordbarn anymore. It seems like many knowledgeable people have left or don't want to post responses. I kind of suspected the bucket was painted first before the other parts were installed, but wasn't sure. Thanks again for the help. Rusty Nelson

06-18-2014, 11:20 AM	#4
30ccpickup Senior Member Join Date: May 2010 Location: Wakarusa, IN Posts: 928	Re: Pickup headlight question QUOTE=wrndln;896102]Dan, Thanks for the help as always. You always come through on pickup questions. I probably should have emailed you directly about the question. I don't seem to get much help on Fordbarn anymore. It seems like many knowledgeable people have left or don't want to post responses. I kind of suspected the bucket was painted first before the other parts were installed, but wasn't sure. Thanks again for the help. Rusty Nelson[/QUOTE] Rusty, I just benefitted from your question. Please keep posting them here. Paul __________________ http://MODELABASICS.com/ How Things Work on a Model "A" Ford Fordbarners, Feel free to use the pictures on my site to answer questions and create tutorials/tech articles.

07-08-2014, 11:42 AM	#7
BlueSunoco Senior Member Join Date: Sep 2013 Location: Windy City Posts: 937	Re: Pickup headlight question I learned something new here today also. Your post was/is much appreciated.