|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-16-2014, 08:41 PM | #1 |
Senior Member
Join Date: Nov 2010
Location: Indiana
Posts: 251
|
Wiper swipes onto Windshield Frame
Have a vacuum wiper on my slant windshield sedan. It works very well but the swipe of the blade travels onto the windshield frame and when it returns ends up a bit on top of the windshield frame also. I verified with others that I have the correct arm and blade. Is there an adjustment I can make to keep the wiper blade on the windshield as it goes through its cycle or... is this normal?
|
05-17-2014, 07:42 AM | #2 |
Senior Member
Join Date: Apr 2012
Posts: 777
|
Re: Wiper swipes onto Windshield Frame
Not normal.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-17-2014, 09:04 AM | #3 |
Senior Member
Join Date: Jul 2011
Location: Illinois
Posts: 193
|
Re: Wiper swipes onto Windshield Frame
Hi colonel, i have a 31 coupe that i had the same issue . I found the wiper arm bends are slightly off. Where it connects to the motor.Just bend the wire wiper arm allittle at a time more or less to adjust. It takes alittle trial and error Before you get it right.
|
05-17-2014, 09:12 AM | #4 |
Senior Member
Join Date: May 2010
Location: Daytona Beach, Fl & Spencer, W. Va,
Posts: 4,442
|
Re: Wiper swipes onto Windshield Frame
Sponsored Links (Register now to hide all advertisements)
Try a shorter blade, MIKE (mikeburch) |
|
|
Sponsored Links (Register now to hide all advertisements) |
|