|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
03-29-2024, 03:00 PM
|
#1 |
|
Junior Member
Join Date: Mar 2024
Location: Windham, NH
Posts: 20
|
I need to pull the speedometer Head from the dash...
...What is the procedure for a '49 Ford Custom?
|
|
|
|
03-30-2024, 01:36 PM
|
#2 |
|
Senior Member
Join Date: Feb 2020
Location: Paducah Ky
Posts: 282
|
Re: I need to pull the speedometer Head from the dash...
Look under the dash at the speedo back. You should see a keeper setup which if removed will allow the speedo to come out the front.
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
03-30-2024, 02:38 PM
|
#3 |
|
Member
Join Date: Mar 2017
Location: Alberta Canada
Posts: 93
|
Re: I need to pull the speedometer Head from the dash...
Pls check your sources Als48. The entire instrument cluster removes from the back of the dash on my 50, it will not go out the front. The speedometer head is screwed into the back of the cluster, to be removed from the back of the cluster. I did loosen and pull away the dash from mine to access it, not that difficult. If you remove the seat you can probably remove the head and or the cluster. Or hire a very small multijointed person to remove it.
|
|
|
|
|
03-30-2024, 02:51 PM
|
#4 |
|
Senior Member
Join Date: Aug 2019
Location: McGregor, IA
Posts: 233
|
Re: I need to pull the speedometer Head from the dash...
Sponsored Links (Register now to hide all advertisements)
__________________
Cheers, Jim&Sandy McGregor, IA |
|
|
|
|
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 05:10 PM.