|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-27-2016, 08:43 AM | #1 |
Senior Member
Join Date: May 2010
Location: West Salem, Wi.
Posts: 281
|
Gen. belt too short
This is my first go around with a flattie so bear with me. Bought a new gen. belt from Macs for my 42 flathead engine and its too short. Measures 53 inches and have to pry it on the pump pulley with the gen. at lowest position. Gen. is now resting on my two carb. Edmunds intake and I can't budge it . Macs doesn't list another 5/8 wide belt that is longer. Any suggestions? Thanks
|
04-27-2016, 09:02 AM | #2 |
Senior Member
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,086
|
Re: Gen. belt too short
Just take it to your local auto parts store and have them match it to a longer one
|
Sponsored Links (Register now to hide all advertisements) |
|
04-27-2016, 09:20 AM | #3 |
Senior Member
Join Date: May 2010
Location: shirley ny
Posts: 992
|
Re: Gen. belt too short
gates B52 55''
|
04-27-2016, 11:19 AM | #4 |
Senior Member
Join Date: May 2010
Posts: 642
|
Re: Gen. belt too short
Try A "B54" Has worked for me!.
|
04-27-2016, 12:38 PM | #5 |
Senior Member
Join Date: Sep 2014
Location: Wiscasset, Maine
Posts: 2,018
|
Re: Gen. belt too short
Gates TR20544. 19/32 X 54-3/4"
|
04-27-2016, 03:25 PM | #6 |
Senior Member
Join Date: May 2010
Location: West Salem, Wi.
Posts: 281
|
Re: Gen. belt too short
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|