Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-08-2012, 10:14 PM   #1
kiddcom
Junior Member
 
Join Date: Jan 2012
Posts: 1
Default Model A Light Switch

I have a 1928 Model A and we have performed a little maintenance over the week-end and ran into a little reassembly question. Our wiring diagrams seems to show that the Light Switch should be a 4 position switch (low beam, high beam, parking, off). Unless the switch is toast, there seems to be only 3 positions. When the lights were reassembled and the wiring color codes checked and rechecked, we ONLY have low beam in 1 position, off, parking. Now the question. What is the correct function of the Light Switch (by position)? We have a replacement wiring harness, but the color codes seem to match original.
kiddcom is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:29 AM.