05-09-2010, 05:23 AM | #1 |
Junior Member
Join Date: May 2010
Posts: 4
|
Fridges Unite!
How many others on here have 57-60 trucks?
Last edited by jasonnilsson; 05-09-2010 at 07:51 AM. |
05-09-2010, 08:08 AM | #2 |
Member
Join Date: May 2010
Location: Taunton, MA
Posts: 81
|
Re: Fridges Unite!
i don't have one. but i love them. so i am looking forward to pics...c'mon fellas.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-09-2010, 07:57 PM | #3 |
Member
Join Date: May 2010
Location: N.W. Mo
Posts: 72
|
Re: Fridges Unite!
I have a '59 survivor.
|
05-09-2010, 11:09 PM | #4 |
Junior Member
Join Date: May 2010
Posts: 4
|
Re: Fridges Unite!
Awesome! I have a 59 F100 Custom Cab Styleside Longbed with a 390 and a C6 Trans. I plan on converting it to four wheel drive with 609 axles front and back, an Atlas Transfer case a big inch stroked small block with over 1000 HP. It'll have a custom interior and a modified bed to raise the rails to match the body lines and add wood to the floor. I haven't decided if i want to make it a short bed or not yet.. As far as paint the top will either be a copper color or a rich darker blue and the bottom will be a cream or ivory. I received the truck for my 16th birthday 13 years ago and have never driven it.
|
05-10-2010, 12:39 AM | #5 |
Junior Member
Join Date: May 2010
Location: So-Cal
Posts: 21
|
Re: Fridges Unite!
Had one wish I never would've sold it. Here's a pic.
__________________
A bad day surfing is better than a good day at work!!! |
05-10-2010, 11:16 AM | #6 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 167
|
Re: Fridges Unite!
Sponsored Links (Register now to hide all advertisements)
|
05-10-2010, 11:22 AM | #7 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 167
|
Re: Fridges Unite!
Here are some various pix of my hard drive @ work
|
05-10-2010, 06:40 PM | #8 |
Member
Join Date: May 2010
Location: Palmdale, CA
Posts: 48
|
Re: Fridges Unite!
I have a 60 Panel..can I play?
It is kinda banged up in the front. I have a 57 and 59 front clip..I'm sure the fenders are the same, but will the grills, hoods etc all bolt on? I guess I'll need to use either core support with its grill.
__________________
I have So Cal rust free parts for 50's-70's Fords and Mercs..Trucks too. Send a PM with needs |
05-11-2010, 07:58 AM | #9 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 167
|
Re: Fridges Unite!
Ray:
You should have no problem using either front end. The lower valance on the 59 and 60 will be the same.(ie square parking lights, 57-58 used round parking lights) You can mix and match the hoods. The 60 hood looks good with the 59 grill |
05-12-2010, 09:42 AM | #10 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 167
|
Re: Fridges Unite!
More
|
05-14-2010, 03:28 PM | #11 |
Junior Member
Join Date: May 2010
Location: Visalia
Posts: 26
|
Re: Fridges Unite!
Of course I have one! or two.
https://www.youtube.com/watch?v=28gtzOJdHqg |
05-14-2010, 06:31 PM | #12 |
Junior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 2
|
Re: Fridges Unite!
Who carries parts for the '57 to '60 trucks?
|
05-18-2010, 10:13 AM | #13 |
Senior Member
Join Date: May 2010
Location: Connecticut
Posts: 167
|
Re: Fridges Unite!
|
05-18-2010, 10:21 AM | #14 |
Member
Join Date: May 2010
Location: Chandler, AZ
Posts: 54
|
Re: Fridges Unite!
Great pics - keep 'em comin'!
|
05-27-2010, 07:50 AM | #15 |
Junior Member
Join Date: May 2010
Posts: 2
|
Re: Fridges Unite!
I just became the proud owner of a '58 SWB about 3 weeks ago and just got the title transfered into my name yesterday. Its gonna be a "shop" truck in that I'm just gonna put a motor in it, undecided on that one still, upgrade the steering and brakes, clean out all the rat and mouse poop from the inside and giver 'er hell.
Last edited by 69supercj; 05-27-2010 at 08:20 AM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|