|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-31-2012, 03:53 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 272
|
Ford manifold part number id
Found two nos exhaust manifolds still in the ford boxes, but dont know what they fit. They look like ram horns for a y block, but not sure. Can someone decode these numbers? Cote-9430-a and eam-9430-d. Any help apprciated. Thanks
|
08-31-2012, 08:46 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Re: Ford manifold part number id
Hello Sprystang, It sounds like you may have Rams Horn manifolds for a Ford Y-Block (COTE-9430-A / 1960 Ford truck 292) and a Lincoln Y-Block truck engine (EAM designates 317 Lincoln V8). If the bolt centers for the mounting holes are all in a straight line with each other, it's for a 292. If the bolt centers are at an angle on the outside ports, it's for a Lincoln 317 truck engine. Sal Cicala.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-31-2012, 08:48 PM | #3 |
Senior Member
Join Date: Dec 2010
Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan
Posts: 638
|
Re: Ford manifold part number id
If the mounting holes are straight across, they're for a Y Block. If the end holes are angled top corner to bottom corner on the ends, they're for a Lincoln truck motor. Looks like you may have one of each engine. The C0TE looks like Y Block, the EAM like Lincoln. The same base number 9430 means they're the same side manifolds.
|
09-01-2012, 10:30 AM | #4 |
Senior Member
Join Date: May 2010
Location: Lake Forest, Southern California.
Posts: 148
|
Re: Ford manifold part number id
Picture of lincoln ram horn...
http://www.fordbarn.com/forum/album....ictureid=16495 |
09-01-2012, 02:18 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 272
|
Re: Ford manifold part number id
Thanks guys, i really appreciate it. Dont look like they will work for my application though. Any idea what they are worth ? Thanks
|
09-01-2012, 03:08 PM | #6 |
Senior Member
Join Date: May 2010
Location: Lake Forest, Southern California.
Posts: 148
|
Re: Ford manifold part number id
Sponsored Links (Register now to hide all advertisements)
|
09-01-2012, 04:12 PM | #7 |
Senior Member
Join Date: Aug 2012
Posts: 888
|
Re: Ford manifold part number id
If you have a set of Rams Horns for a 292 Y-Block they can be used on 50's F-100's to get rid of their single exhaust. Try over on Ford Truck Enthusiast Forum to see if anyone is wants them.
Speedway is selling them new for ~$380 so you should be able to sell them if they are in good shape. Ford Ram Horn Manifolds
__________________
The Master Cylinder Enjoying life at the beach in SoCal... Last edited by The Master Cylinder; 09-01-2012 at 04:18 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|