05-15-2013, 05:03 PM | #1 |
Member
Join Date: Jan 2013
Posts: 30
|
1926-27 frame
Hello, looking to find out if all the Model T frames and body mount bracket locations were the same. I have a 1927 touring and would like to know if the body mounts would match up with an earlier frame/mounts. Thank you.
|
05-15-2013, 07:53 PM | #2 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,342
|
Re: 1926-27 frame
Yes all late 25 to 27 car frames are the same as are mounting points on body.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-15-2013, 09:00 PM | #3 |
Member
Join Date: Jan 2013
Posts: 30
|
Re: 1926-27 frame
Thank you for the response but what about pre-'25. The reason I am inquiring is because I have a 1927 touring (100% Ford Model "T"as is the frame) that I can't line up the body with the body mounts because the firewall would actually touch the back of the motor. The only difference I thought in frames was the rear end of the frame is longer on the '26-27.
|
05-15-2013, 10:30 PM | #4 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,342
|
Re: 1926-27 frame
Sorry I missed that part of the question maybe some one with a 26/27 frame can measure the distance from the front of the frame to the hole in the body support.
|
05-16-2013, 09:32 AM | #5 |
Member
Join Date: May 2010
Posts: 42
|
Re: 1926-27 frame
26 27 body is a little longer also, gas tank is up in the cowl. the fenders mount different on a 26 27 also, so if your needing them, u need the correct front cross member, hood shelf brackets. it would be easier to swap frames so it all lines up
|
05-16-2013, 09:47 AM | #6 |
Member
Join Date: Jan 2013
Posts: 30
|
Re: 1926-27 frame
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|