One barrel 2x2 unit- complete-fuel ready

[Dick's Hot Rod Place]

Here is something a bit different for the single barrel crowd. You have a single barrel intake and your little motor has no bling, but you would sure like to have something under your hood to talk about, eh? Well bucko, here is the ideal thing to not only add some eye candy but also to add some performance to your 6 cylinder without having to go to the expense or the labor to change the original intake. This unit consists of a new 2x2x1 adapter for most any one barrel intake, added with 2-Holley 94 carbs completely rebuilt and most of all reconfigured to run on your 6 cylinder engine. You will also have some reasonable economy because it is set up to use a single carburetor via polished progressive linkage until 60% throttle is achieved. Fuel distribution is plumbed by way of custom polished fuel log, polished hard line, liquid filled fuel pressure gauge, as well as a fuel pressure regulator. Added to the top for air filtration is 2 new chrome bonnets with tri bar hold down nuts. Cost is $895.

[Dick's Hot Rod Place]

bump

[Dick's Hot Rod Place]

yip.........

[Dick's Hot Rod Place]

Okay

[Dick's Hot Rod Place]

Sponsored Links (Register now to hide all advertisements)

Try again