|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-24-2010, 10:31 AM | #1 |
Senior Member
|
Zenith 19322 Carb -Auto Technology
I finally got to test drive the tudor with the 19322 zenith installed. Wow what a difference. The pickup is significantly better and the top end speed is unknow. I got the car up to around 52 with plenty of pedal left. I wasn't comfortable going any faster as the brakes on an A are limited and the front end tends to float a bit at speeds over 50 - 55. This carb replaced was is rebuilt Tilly and there is quite an improvement over it. I am curious as to the gas milage it will deliver. I am so pleased that , I may purchase another for the green fordor. God speed at under 50 mph.
|
10-24-2010, 12:48 PM | #2 |
Senior Member
Join Date: May 2010
Location: Young Harris, GA
Posts: 1,818
|
Re: Zenith 19322 Carb -Auto Technology
Is this the modern forklift engine carb we have seen and heard about? I do not remember numbers very well.
__________________
Jim Cannon Former MAFCA Technical Director "Have a Model A day!" |
Sponsored Links (Register now to hide all advertisements) |
|
10-24-2010, 01:05 PM | #3 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Zenith 19322 Carb -Auto Technology
|
10-24-2010, 01:45 PM | #4 |
Senior Member
|
Re: Zenith 19322 Carb -Auto Technology
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|