08-24-2013, 07:02 PM | #61 |
Senior Member
Join Date: May 2010
Location: Richland Mi.
Posts: 1,172
|
Re: Model A motor froze-up
Betsy, I don't think that you are to that point yet. After you get that motor spinning most the MMO will come out of the spark plug holes and past the valves to the crankcase. That is good thing to have the MMO around the valves and valve stems. At that point you may want to remove the drain plug and see what comes out besides oil.
Last edited by Ross/Kzoo; 08-24-2013 at 07:14 PM. |
08-24-2013, 07:03 PM | #62 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
montanafordman,
I posted a picture of Betsy on my profile page. Haven't figured out how to get it out of there. |
Sponsored Links (Register now to hide all advertisements) |
|
08-24-2013, 07:04 PM | #63 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
Aha! The more I hear the more things make sense. Thanks.
|
08-24-2013, 07:13 PM | #64 |
Senior Member
Join Date: Apr 2011
Posts: 319
|
Re: Model A motor froze-up
First try removing the starter. i've found many with the starter drive hung up and not just Model A's. Acetone and Atf works if it is actually stuck. Then load it on a trailer,chain it loosely and put it in high gear. drag aroung with you and watch the fan blade as the car tries to roll. i've had tractors free in a trip to lonch. Worst one took two days of following me. Good luck!!!!!!!!!!!
|
08-24-2013, 07:56 PM | #65 |
Senior Member
Join Date: Jul 2013
Location: San Antonio, Texas
Posts: 687
|
Re: Model A motor froze-up
My engine was stuck about 3 weeks ago also. What I did to settle my curiosity was remove the oil pan and dry every piston and rod really good. So when I poured the mixture in each cylinder I could clearly see from the bottom of the engine which cylinder was allowing the fluid to leak past the rings. The dry piston and rod is the culprit. The one stuck. Eventually I still pulled the head off to which I was glad I did due to the number 1 cylinder being severely gouged from a broken locking pin and moving piston pin.
|
08-24-2013, 08:26 PM | #66 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
Sponsored Links (Register now to hide all advertisements)
|
08-24-2013, 08:28 PM | #67 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
Anteek, thanks. Will keep posting progress - when I get some.
|
08-24-2013, 08:41 PM | #68 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
Happy for your success. Mine is yet to come.
|
08-24-2013, 08:55 PM | #69 | |
Senior Member
Join Date: May 2010
Location: Bucks Co, Pa
Posts: 3,740
|
Re: Model A motor froze-up
I know this was well intentioned, But.... You're asking a woman who has very limited mechanical experience to crawl underneath a truck that's been sitting in place for over 50 years. Then know how to take a oil pan down. At some point she's going to have to put it back, new gaskets and all. A Formidable task to be sure. In fact, I regards taking an oil pan down as a really rotten job and I know what's involved. Think of what could go wrong for a person who has never done it before. I believe this engine can be freed without taking it apart. In fact I think that she's almost there with the crank starting to move.
Terry Quote:
|
|
08-24-2013, 08:59 PM | #70 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Model A motor froze-up
wouldnt it be something if it turned out to be a frozen brake drum and stuck clutch disc.
Last edited by Mitch//pa; 08-24-2013 at 09:05 PM. |
08-24-2013, 09:17 PM | #71 |
Senior Member
Join Date: May 2010
Location: Bucks Co, Pa
Posts: 3,740
|
Re: Model A motor froze-up
What comes Next! Betsey, when you do get it to turn over, remember, there is rust on the cylinder walls and the camshaft and other parts as well. This rust rubs off and gets into the oil as an abrasive particle, much like sand. And much like sand, they can destroy the engine. It is a balancing act to know how long you should take to get this contaminated oil out of the system. Too long and you risk damage, too soon and you don't get enough of the particles. The old story I heard was about ten minutes at idle speed. Then it has to be changed. When it's changed, pour a qt. of diesel/fuel oil through the engine to flush what ever particles are left behind. This will begin the desludgeing process. Put the cheapest DETERGENT oil you can find. After about five hours (of running) or so, Drain this oil out and replace with a somewhat better quality oil. Terry
|
08-24-2013, 09:34 PM | #72 |
Senior Member
Join Date: May 2010
Location: Bucks Co, Pa
Posts: 3,740
|
Re: Model A motor froze-up
YES!!! I know why a Dr won't diagnose over the phone! You try to think of everything! Without seeing it, it's all a guessing game, but with probabilities.
Mod A engines are prone to seizing up after long periods of inactivity. Same with my Allis Chalmers. I had to free the engine up[, The previous owner hadn't started it in about three years. MMO did the trick for me. That is the the 1938 A.C. mod B in my profile. Terry |
08-25-2013, 02:50 AM | #73 | |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Model A motor froze-up
Quote:
Think about it Sonny Boy, Iffin' the disc wuz stuk, wouldn't matter none, iffin' the transfuselator wuz in NEUTRAL! (Thet's where the stick will WOBBLE side to side, like in the middle uf the "H" pattern! (BUT, I cain't shift it fer you, NO THUMBS) Buster T.
__________________
"THE ASSISTANT GURU OF STUFF" |
|
08-25-2013, 06:00 AM | #74 | |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Model A motor froze-up
Quote:
Ill send you a bone |
|
08-25-2013, 07:50 AM | #75 |
Member
Join Date: Feb 2013
Location: Harvey, ND
Posts: 99
|
Re: Model A motor froze-up
Terry, NJ
You got me pegged. All suggestions given have given me both a heavy-heart of defeat before I get going, and yet, a desire to keep going. I'm going to keep trying. I'll report if I get ANY success. If not, I'll try another suggestion. I do have "cheap" oil on hand for a flush. I also have ATF and acetone on hand for another option. I've been trying to get the plug out of the oil pan, but it, too, is stuck. I sprayed it with liquid wrench, leaving it to penetrate. Will give it another try today. Yes, I'm a 72-year-old woman, with a new mechanical passion. Thanks, Fellows. Last edited by BetsyModelA; 08-27-2013 at 08:21 AM. |
08-25-2013, 07:59 AM | #76 |
Senior Member
Join Date: May 2010
Location: Richland Mi.
Posts: 1,172
|
Re: Model A motor froze-up
It didn't get stuck overnight and it won't get unstuck overnight. Just keep "plugging" away. Sorry I couldn't resist that one. When loosening stuck bolts/plugs sometimes a little force in the opposite direction will help loosening.
|
08-25-2013, 08:21 AM | #77 |
Senior Member
Join Date: May 2010
Location: Homestead, Fl
Posts: 351
|
Re: Model A motor froze-up
"All suggestions given have given me both a heavy-heart of defeat before I get going, and yet, a desire to keep going"
DON'T YOU DARE LET IT BEAT YOU!!!. If there's one thing us old farts have learned over the years is patience. If it doesn't break loose today, it's just not ready yet. So you wait for the next day, or the next one. It'll come. Just keep bumpin' it. |
08-25-2013, 10:10 AM | #78 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Model A motor froze-up
I wouldn't worry about draining the pan yet, but it would be nice to loosen the plug to see if antifreeze comes out first. It it does, then it might be time to take the engine apart. I had to do a GM inline 6 that was stored for 5 or 6 years with antifreeze that leaked into the cylinders. It was stuck very tight and I had to pull the head, pan and pistons out to get it unstuck and give it an overhaul. If antifreeze doesn't come out the drain plug that's a very good sign and I'd keep rocking the car back and forth in high gear.
I do like the idea of chained loose on a trailer, then towing it around as a way to loosen a stuck engine. |
08-25-2013, 10:12 AM | #79 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: Model A motor froze-up
Like Tom I have a old starter with a nut welded on the end of of the armature shaft. Not as nice as Tom's but does the job. At this point it would break it loose, always works. If you have a old starter try it. Tom gave you some good advice.
|
08-25-2013, 11:42 AM | #80 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,794
|
Re: Model A motor froze-up
I know there are no MAFCA or MARC clubs in North Dakota but maybe someone with
a roster can see if there are any members in ND that could help. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|