|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-03-2023, 02:38 AM | #1 |
Senior Member
Join Date: Jun 2022
Posts: 308
|
Washers, yay or nay, on stock head studs
Should I use hardened washers, with the stock nuts and studs, when installing the stock iron heads on a 59 AB? Was there a reason that washers were not used originally on these engines?
In my practical mind, it seems like washers would greatly assist in maintaining the torque value, on these nuts, as the engine is run and warmed up. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|