|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-28-2014, 07:18 PM | #1 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
Holly/Zenith carburetor
Can I mix a Holly bottom with a Zenith top? The holly bottom doesn't have a secondary well. Is that normal?
|
05-28-2014, 07:34 PM | #2 |
Senior Member
Join Date: Aug 2010
Location: Port Orchard, WA
Posts: 1,498
|
Re: Holly/Zenith carburetor
If there is no brass secondary well that would mean the bottom casting is from a double venturi carburetor, and the cap jet is in a different location. This would not work well with a single venturi. Also there would be a pin boss on the casting to locate the double venturi. Also the idle jet #10 would be used with the integral cast iron secondary well and it is a little longer that a #11 idle jet.
__________________
1931 160B & 1931 68B If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time? |
Sponsored Links (Register now to hide all advertisements) |
|
05-28-2014, 07:37 PM | #3 |
Senior Member
Join Date: Sep 2011
Location: Luck WI
Posts: 550
|
Re: Holly/Zenith carburetor
Sponsored Links (Register now to hide all advertisements)
__________________
Jon "If you choose to not decide, you still have made a choice!" RUSH Don't tell me what you know..... Tell me what you have done. |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|