The Ford Barn

35 rancho · 01-20-2014, 04:24 PM

Newbe in this dept. Just got a 66 Ranchero , From the original owner. Has bucket seats , 289, automatic, 3- 2 barrels ,power stearing, and air condition. Its been stored out side in a field, where a big bolder slid down hitting the car. I will be looking for a left rear 1/4 panel. drug it home Sat. pulled out most of the rat nest. Just wondering if anyone can direct me to parts for this thing, and is this a rare setup? Everything seems to be factory installed. Thanks for any pointers. Dave

JeffB2 · 01-20-2014, 04:37 PM

This is a source for the 1/4 panel: http://www.dvap.com/salvage/1966-for...ero-66fo3420d/

toby · 01-20-2014, 04:40 PM

www.ranchero.us

Macs Anitque Auto Parts

http://www.macsautoparts.com
Autokrafters

http://www.autokrafters.com
Dearborn Classics

http://www.dearbornclassics.com
Marti Auto Works

http://www.martiauto.com

paul2748 · 01-20-2014, 10:48 PM

3 2 bbls were not a factory set up.

34pickup · 01-21-2014, 08:25 PM

The 3x2 setup only came stock on the big block FE engines, 390 and 406. If you have a setup on a 289 then its probably one of the Cobra aftermarket/dealer sold units.

Ford blue blood · 01-22-2014, 09:52 AM

Sponsored Links (Register now to hide all advertisements)

67 Fairlane quarter will fit. My 66 has a 67 quarter on it.

1967gt · 01-22-2014, 12:11 PM

No it wont...

frank long island · 01-22-2014, 02:37 PM

depending on your damage you maybe able to get a skin and keep the jamb and other parts to attach it also try panel adhesive when replacing it saves a lot of time on cleanup google rust repair panels for your part

Ford blue blood · 01-23-2014, 08:42 AM

Quote:

Originally Posted by 1967gt

No it wont...

Yes it will. This picture is the car after a drunk hit it. Not me in the pic, that right rear quarter came off a 67 Fairlane, I know because I cut it off the Fairlane.

OK, won't upload the pic, don't say why, just that it failed.

Found a couple of pics....most of the build pics went with the car when it was sold.

01-20-2014, 04:24 PM	#1
35 rancho Member Join Date: Sep 2010 Location: San Diego Posts: 92	66 Ranchero Newbe in this dept. Just got a 66 Ranchero , From the original owner. Has bucket seats , 289, automatic, 3- 2 barrels ,power stearing, and air condition. Its been stored out side in a field, where a big bolder slid down hitting the car. I will be looking for a left rear 1/4 panel. drug it home Sat. pulled out most of the rat nest. Just wondering if anyone can direct me to parts for this thing, and is this a rare setup? Everything seems to be factory installed. Thanks for any pointers. Dave

01-20-2014, 04:37 PM	#2
JeffB2 Senior Member Join Date: May 2010 Location: Phoenix,AZ Posts: 1,417	Re: 66 Ranchero This is a source for the 1/4 panel: http://www.dvap.com/salvage/1966-for...ero-66fo3420d/

01-20-2014, 04:40 PM	#3
toby Senior Member Join Date: May 2010 Location: Racine, WI Posts: 472	Re: 66 Ranchero www.ranchero.us Macs Anitque Auto Parts http://www.macsautoparts.com Autokrafters http://www.autokrafters.com Dearborn Classics http://www.dearbornclassics.com Marti Auto Works http://www.martiauto.com

01-20-2014, 10:48 PM	#4
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 3,998	Re: 66 Ranchero 3 2 bbls were not a factory set up.

01-21-2014, 08:25 PM	#5
34pickup Senior Member Join Date: May 2010 Location: Huntsville Al Posts: 1,527	Re: 66 Ranchero The 3x2 setup only came stock on the big block FE engines, 390 and 406. If you have a setup on a 289 then its probably one of the Cobra aftermarket/dealer sold units. __________________ Matt 24:36-41

01-22-2014, 09:52 AM	#6
Ford blue blood Senior Member Join Date: Jul 2011 Location: Birmingham, AL Posts: 821	Re: 66 Ranchero Sponsored Links (Register now to hide all advertisements) 67 Fairlane quarter will fit. My 66 has a 67 quarter on it. __________________ Bill, certified Ford nut. 2016 F-150 2016 Focus 08 Shelby GT500 57 Ford Ranchero 36 Chevy, 351C/FMX, 8", Mustang II

01-22-2014, 12:11 PM	#7
1967gt Senior Member Join Date: Jun 2013 Location: home of the REDS Posts: 392	Re: 66 Ranchero No it wont...

01-22-2014, 02:37 PM	#8
frank long island Senior Member Join Date: May 2010 Location: westbury ny Posts: 854	Re: 66 Ranchero depending on your damage you maybe able to get a skin and keep the jamb and other parts to attach it also try panel adhesive when replacing it saves a lot of time on cleanup google rust repair panels for your part