The Ford Barn - View Single Post

BILL WILLIAMSON · 12-19-2013, 04:55 AM

You mentioned in the other thread that you have an inspection camera. Count the ring gear & pinion teeth, then divide the BIG number by the LITTLE number & you have the rear end ratio----TA-DA! The most common is 3.78 to 1.
Bill W.

12-19-2013, 04:55 AM	#2
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: One more rear end question You mentioned in the other thread that you have an inspection camera. Count the ring gear & pinion teeth, then divide the BIG number by the LITTLE number & you have the rear end ratio----TA-DA! The most common is 3.78 to 1. Bill W. __________________ "THE ASSISTANT GURU OF STUFF"