Quote:
Originally Posted by Tom Wesenberg
Good point Dave.
Actually I meant the ones at the battery access hole, which wouldn't be there if a saber saw was used to cut the oval hole. I'll be putting them in my repro boards.
|
Good catch. The slot obviously cut first with a circular saw from the backside, and then completed from the front with a saber/jig type saw.
NOT a hole saw as I might be wont to do in expediency.
Edit: Hmm. Look at that hole for the gearshift. Obviously done with a hole-saw. Do you suppose it's the same diameter as the battery slot ends?
Joe K