The Ford Barn - View Single Post

Fullraceflathead · 10-08-2021, 11:03 AM

I’ve used my press to press out the old spindle bushings and Press in new bushings in also my steering box bushings. You will find just about anything that has a bushing you can use your press to press out old and press in new bushings in. If you have a lathe you can make new bushings and most of your sockets can be used as bushing drivers.
I made a video on YouTube showing how I used my press to remove and replace the front spindle bushings on my Model A.
https://m.youtube.com/playlist?list=...gvqn60A_JPvFda

10-08-2021, 11:03 AM	#13
Fullraceflathead Senior Member Join Date: May 2012 Location: Chillicothe, Missouri Posts: 1,191	Re: What can you do with a shop press? I’ve used my press to press out the old spindle bushings and Press in new bushings in also my steering box bushings. You will find just about anything that has a bushing you can use your press to press out old and press in new bushings in. If you have a lathe you can make new bushings and most of your sockets can be used as bushing drivers. I made a video on YouTube showing how I used my press to remove and replace the front spindle bushings on my Model A. https://m.youtube.com/playlist?list=...gvqn60A_JPvFda __________________ "If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask Last edited by Fullraceflathead; 10-08-2021 at 11:11 AM.