The Ford Barn - View Single Post

James Rogers · 07-24-2014, 05:05 AM

Have the one bad cylinder sleeved with a 1/8" sleeve and bore all the cylinders at .100. If you use a 1/8" wall sleeve and leave a ledge at the bottom for it to sit on it will bore to .100 with no problem.

07-24-2014, 05:05 AM	#4
James Rogers Senior Member Join Date: May 2010 Location: Asheville,NC Posts: 3,104	Re: Model A engine overbore 125+? Have the one bad cylinder sleeved with a 1/8" sleeve and bore all the cylinders at .100. If you use a 1/8" wall sleeve and leave a ledge at the bottom for it to sit on it will bore to .100 with no problem. __________________ http://www.model-a-ford-4bangers.com/