[36 conv sedan]

Ok guys... bear with me. I always say that in most cases it takes almost the same effort to do things correctly or incorrectly...

I am going to do the cardboard for under the seat, as in the pic posted by tmodelman, above. I can see it is not the full width of the area under the seat but just the width of the depressed area where you store the tools... so it is pretty obvious and you can see in the pic that the sides of that depressed area do not get covered. What I cannot see and would like to ask is:

Where does the cardboard ends at the front... on the bottom of the depressed area or does it come up the front wall?

Where does it end in the rear, just at the back of the car/body curve?

In my case, the battery (Optima, 6 volts) was moved to that area by the prior owner, so I need to find out where the original battery was placed and find a battery box to return it to where it should be.

Thanks,
victor