The Ford Barn - View Single Post

mcgarrett · 01-27-2024, 08:07 PM

Synchro909,
Thanks for adding more clarification to this subject. If you have a moment, take a look at the link in post #2. Do you have any idea where the fitting and tube installed on the pan rail near the oil pump hole connects to? I looked at my block on the engine stand and I can't see where it would pick up any oil pressure from the pump. I don't understand what this would accomplish. Maybe someone else here on the Barn has seen this and could reply.

01-27-2024, 08:07 PM	#7
mcgarrett Senior Member Join Date: Dec 2013 Location: Waxahachie, Texas Posts: 952	Re: Pressurized center main bearing? Synchro909, Thanks for adding more clarification to this subject. If you have a moment, take a look at the link in post #2. Do you have any idea where the fitting and tube installed on the pan rail near the oil pump hole connects to? I looked at my block on the engine stand and I can't see where it would pick up any oil pressure from the pump. I don't understand what this would accomplish. Maybe someone else here on the Barn has seen this and could reply.