The Ford Barn - View Single Post

Aerocraft · 07-21-2010, 04:23 AM

I had the same problem with my 155A Murray Town sedan. First sorted all of the hardware by diameter and length. Then made a chart of what I needed, for example how many screws required to hold the quarter window garnish moldings in place. In some cases it is easy to pick out where the hardware is used. Then it was a matter of elimination by first making sure the head fits if it is an oval screw, then checking the length by a trial fit.
I know of no charts that will help, maybe somebody will have better information. Gar Williams

07-21-2010, 04:23 AM	#2
Aerocraft Senior Member Join Date: May 2010 Location: Naperville, IL Posts: 1,387	Re: Interior screw kit I had the same problem with my 155A Murray Town sedan. First sorted all of the hardware by diameter and length. Then made a chart of what I needed, for example how many screws required to hold the quarter window garnish moldings in place. In some cases it is easy to pick out where the hardware is used. Then it was a matter of elimination by first making sure the head fits if it is an oval screw, then checking the length by a trial fit. I know of no charts that will help, maybe somebody will have better information. Gar Williams