The Ford Barn - View Single Post

Dick M · 03-26-2017, 06:41 PM

Go to Harbor Freight and buy two ratchet straps for around $10-15 bucks. Place one around the bell housing and hook it to the hoist. Put a bolt in the generator mounting hole. Connect the strap from the bolt to the hoist. You can get the angle pretty close for installation.

03-26-2017, 06:41 PM	#11
Dick M Senior Member Join Date: May 2010 Location: Ukiah, CA Posts: 477	Re: Need engine in TODAY!! Go to Harbor Freight and buy two ratchet straps for around $10-15 bucks. Place one around the bell housing and hook it to the hoist. Put a bolt in the generator mounting hole. Connect the strap from the bolt to the hoist. You can get the angle pretty close for installation.