Re: Spark lever position at idle and temperature sensitivity
Kurt, That is a good suggestion. In addition, Bandit's throttle linkage may not allow the carburetor idle speed screw to fully control the setting. I had that happen to me and had to bend the arm on the throttle shaft that crosses in back of the block.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|