Evap-O-Rust Problem
A couple of years ago I started soaking my shocks in Evap-O-Rust. In the midst of this is when my daughter Jessica became ill and put us on a 10 week tour of hospitals. I had been soaking them two by two in a plastic coffee can and putting them under the bench overnight and rinsing them the next day. Needless to say in the cloud of smoke and confusion we left in, I forgot about them. Last night while doing more cleaning in the shop I opened the coffee can and there they were covered in thick sticky goo that to this point will not simply rinse off. Does anyone know what will take the dried on goo off at this point? Any fail safe ideas are welcome. Thanks Rod
|