The Ford Barn - View Single Post - Converting 1929 Coupe from Rumble Seat to Trunk...

woodiewagon46 · 01-25-2015, 03:27 PM

My 1929 Business Coupe came from the factory with a rumble seat inner panel PN-50203. I know it was never replaced because I am the third owner. As you know you can use a rumble panel for a trunk car but can't use a trunk panel for a rumble seat. I am in the process of replacing the panel with the correct one PN-45203 with a mint one that I picked up thru a dealer friend at Hershey. The panel does bolt in using six 10-32 x 5/8" oval head bolts along the top edge and eight 1/4-20 x 1/2 " oval head bolts along the bottom edge. Brattons has the bolt kit.

01-25-2015, 03:27 PM	#14
woodiewagon46 Senior Member Join Date: Jun 2012 Location: Long Island,NY Posts: 1,555	Re: Converting 1929 Coupe from Rumble Seat to Trunk... My 1929 Business Coupe came from the factory with a rumble seat inner panel PN-50203. I know it was never replaced because I am the third owner. As you know you can use a rumble panel for a trunk car but can't use a trunk panel for a rumble seat. I am in the process of replacing the panel with the correct one PN-45203 with a mint one that I picked up thru a dealer friend at Hershey. The panel does bolt in using six 10-32 x 5/8" oval head bolts along the top edge and eight 1/4-20 x 1/2 " oval head bolts along the bottom edge. Brattons has the bolt kit.