View Single Post
Old 06-17-2013, 10:25 AM   #1
Ron/IA
Senior Member
 
Join Date: May 2010
Location: Amana IA
Posts: 527
Default Tire Pumps Parts

I have an old tire pump that belonged to my Dad, and he used it for the Model A. It could use some TLC. The rubber cup inside is getting just hard enough to not let the pump work very well. I would like to replace the cup.

The pump is similar to the Model A pump with the two-handed wooden handle and a base for your feet, rubber hose, screw on valve stem connector, etc. I have not been able to find a brand name or model number. There is cast in the bottom of the foot hold "MADE IN USA", and the letter "N". The diameter of the bore is 1-3/8 inches.

I have searched the internet, and also looked at the vendors catalogs with no luck finding said rubber cup.

I was wondering if anyone out there in Fordbarn country might have a source for old tire pump parts, or have a repair procedure that would bring the rubber back to life.

Thanks, Ron/IA
__________________
Ron/IA
1929 Fordor Steelback

Hawk A Model A Ford Club
http://hawkamodelaclub.org/
Ron/IA is offline   Reply With Quote