View Single Post
Old 11-07-2012, 01:15 PM   #6
FlatheadTed
Senior Member
 
FlatheadTed's Avatar
 
Join Date: May 2010
Location: Auckland
Posts: 4,691
Send a message via AIM to FlatheadTed
Default Re: 1936 ford body help

Sponsored Links (Register now to hide all advertisements)
(1) Repair the corner so you retain the hole for mounting.Trial fit the door .
(2) With the bracing in place remove the old floor
(3) Mount the new floor and rockers on the chassis
(4) Lower the body over it
(5) Aline all, bolt and clamp in place ,
(6) Fit all the small panels doors ,Hood, Grill bumper irons ,fenders
(7) When you are satisfied of aliment ,tack weld the body mounting points at each pillar
(8) Screw the Rocker and floor together ,bolt across the K member .and rockers into the side of frame .
(9) Repair any lower body Patches .tack them in .
(10) remove it from chassis ,Final weld every thing and into the rockers from underneath ,*
* your choice
__________________
http://www.flatheadted.com


Flathead Ted brake Floaters ,

Last edited by FlatheadTed; 11-07-2012 at 07:30 PM.
FlatheadTed is offline   Reply With Quote