View Single Post
Old 05-02-2011, 07:39 AM   #4
Keith True
Senior Member
 
Keith True's Avatar
 
Join Date: May 2010
Location: Epping N.H.
Posts: 2,969
Default Re: uncovered upholstery panels

I've used them on three trucks.A 28 RPU,A 30 RPU,and a 30 closed cab,and have one more set to cover for a 31 closed cab.Cutting them out is easy enough,but at the time I bought them the price difference between buying raw panel stock and buying the pre-cuts was something like $12.If you can buy panel stock locally you might save,but if you have to have it shipped it will be oversized,and nowadays that is a big factor.The pre-cuts are not oversized,at least not for the pickups.Absolute authenticity is not an issue for me,so I didn't have to sew or bind.I live near LB,and watching them cut the panels is the best part of the operation.Lay the stock on the table,program the machine for the application,line the stock up in the grid and push the start button.In a few seconds you have a panel with all the cutouts and holes.
Keith True is offline   Reply With Quote