The Ford Barn - View Single Post

BudP · 01-28-2015, 09:53 PM

This happened to me about 4 months ago. Had a dead short which fried the ammeter (an original !). Found that my terminal box brass screws were in direct contact with the firewall. I replaced the terminal box and the ammeter. No problem since then.

01-28-2015, 09:53 PM	#4
BudP Senior Member Join Date: Jun 2011 Location: Oakton, VA Posts: 437	Re: Overheated Ammeter This happened to me about 4 months ago. Had a dead short which fried the ammeter (an original !). Found that my terminal box brass screws were in direct contact with the firewall. I replaced the terminal box and the ammeter. No problem since then.