Re: Engine Stand Question
Mount to the coolant inlet on the side of the engine. Use grade 5 or better bolts that are fully engaged in the threaded holes. Use washers if too long. I had to weld my arms to the plate to keep them from rotating. I can grind the weld away if the stand is needed for a more modern engine (doubtful).
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|