The Ford Barn - View Single Post

Paul in Colorado · 11-26-2011, 11:02 AM

On my 1930 coupe, the steering column support fit fine. But on my 1930 Briggs Town Sedan, I had the same problem you have. It is probably the same as your Cabriolet. I had to make a spacer also. I made it from square aluminum tubing. I believe the overall height was 5/8 inch. This centered the steering column in the original bracket. I just removed the rubber and installed the original cap.

11-26-2011, 11:02 AM	#5
Paul in Colorado Senior Member Join Date: May 2010 Location: Arvada, Colorado Posts: 175	Re: Steering column support problem On my 1930 coupe, the steering column support fit fine. But on my 1930 Briggs Town Sedan, I had the same problem you have. It is probably the same as your Cabriolet. I had to make a spacer also. I made it from square aluminum tubing. I believe the overall height was 5/8 inch. This centered the steering column in the original bracket. I just removed the rubber and installed the original cap.