Thread: PV in carb
View Single Post
Old 08-12-2013, 09:43 PM   #3
flatjack9
Senior Member
 
flatjack9's Avatar
 
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,527
Default Re: PV in carb

Sponsored Links (Register now to hide all advertisements)
The air fuel ratio needs to be richer at full power operation. When the vacuum drops below a certain value, determined by which power valve you have, the valve opens and allows additional fuel. Without the valve, the engine would be lean at higher power levels. If you block the power valve, you need to install larger jets which will hurt your economy.
flatjack9 is offline   Reply With Quote