View Single Post
Old 09-10-2011, 04:43 PM   #14
Kohnke Rebabbitting
Senior Member
 
Join Date: May 2010
Location: 60615,330th Ave.,Clare, Iowa, 50524
Posts: 1,457
Default Re: model A and model B lifters

Quote:
Originally Posted by hardtimes View Post
Your opinion makes sense to me! Cleanliness is next to perfection in fine engine work..I've always been indocrinated!

Also, I've been told/informed (by cam people, in answer to my Q re reground cams) that NO ONE rehardens the surface on 'reground cams'. Anyone have an opinion whether that is TRUE?

Herm...if B lifter has larger base than A..AND THAT'S GOOD..Why doesn't someone make an even larger base that the B lifter has
Mr. Hardtimes, the cams that we put in, and have reground, all are surface hardened. You can tell by looking at the lobes on your cam, as if it was done, they should be Black, or Brown. They will not last as long with out it. Them that say that it is not done, or don't need it, don't Know, or can't afford what it takes to do it. Herm.

Last edited by Kohnke Rebabbitting; 09-10-2011 at 05:52 PM.
Kohnke Rebabbitting is offline   Reply With Quote