View Single Post
Old 05-23-2013, 12:45 PM   #2
Bruce Lancaster
Member Emeritus
 
Join Date: May 2010
Location: Madison, NJ
Posts: 5,230
Default Re: '49 8BA Valve stem seals

1. Make sure all tin, the little clips that shield bottom of valley and the vertical tube ventilation stack, are in place.
2. Make sure draft tube is open all the way...there is a screen thing in there that can clog it. It is the exit for stock ventilation system.
3. Consider a PCV kit, simple and cheap on this.
Bruce Lancaster is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)