The Ford Barn - View Single Post - Adhesive for gluing door seals to door panels

wrndln · 01-17-2013, 12:50 PM

Spike, there are no small holes in the door for any kind of weather strip material. Only the roughly 5/16" size holes that the mounting clips snap into. The rubber weather strip material I bought from Bratton's doesn't reach to the clip holes. The top of the rubber is about 1/4" from the upholstery clip holes. I don't see any option but to glue it to the inside of the panel. Another problem is the rubber weather strip material does not want to lay straight. In its natural state it looks like a big C.
Rusty Nelson

01-17-2013, 12:50 PM	#3
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,169	Re: Adhesive for gluing door seals to door panels Spike, there are no small holes in the door for any kind of weather strip material. Only the roughly 5/16" size holes that the mounting clips snap into. The rubber weather strip material I bought from Bratton's doesn't reach to the clip holes. The top of the rubber is about 1/4" from the upholstery clip holes. I don't see any option but to glue it to the inside of the panel. Another problem is the rubber weather strip material does not want to lay straight. In its natural state it looks like a big C. Rusty Nelson