View Single Post
Old 10-09-2013, 10:43 AM   #11
Karl Wescott
Senior Member
 
Karl Wescott's Avatar
 
Join Date: May 2010
Location: Oregon
Posts: 1,265
Default Re: Tail light mounting location for 1936 Truck

Quote:
Originally Posted by hotcoupe View Post
www.mackhilsmetalfabrication.com/ reproduces the tail light bracket that i used on my `37. however they only make the left side [driver], so you have to cut one apart and weld it back together - because of the offset.
tom
Rather than the cut and weld route, consider the heat and bend path. Those brackets are mild steel and should stand up to a little shade tree blacksmith work well.
Karl Wescott is offline   Reply With Quote