View Single Post
Old 07-14-2014, 10:58 PM   #16
jdfinch22
Junior Member
 
jdfinch22's Avatar
 
Join Date: Dec 2012
Location: philipsburg pa
Posts: 28
Default Re: 1929 Model A Ford popout ignition switch

Quote:
Originally Posted by jw hash View Post
On 28-29 and early 30 you (do not) need a key to take it apart if you look at Tom`s picture there is a Botton head set screw on the side take it out and the tumbler will come out with the lock ring, sometimes they can be a little sticky so hold it in one hand and with the other hand pop it in and let popout it will knock the ring loose. on the 28-29 cable Bratton part #16370 30 with a oval speedo it used the same head but the cable is longer,

thanks for the info was able to get mine apart so I could see the number on the tumbler now to get a key
jdfinch22 is offline   Reply With Quote