View Single Post
Old 01-08-2012, 10:14 PM   #1
kiddcom
Junior Member
 
Join Date: Jan 2012
Posts: 1
Default Model A Light Switch

I have a 1928 Model A and we have performed a little maintenance over the week-end and ran into a little reassembly question. Our wiring diagrams seems to show that the Light Switch should be a 4 position switch (low beam, high beam, parking, off). Unless the switch is toast, there seems to be only 3 positions. When the lights were reassembled and the wiring color codes checked and rechecked, we ONLY have low beam in 1 position, off, parking. Now the question. What is the correct function of the Light Switch (by position)? We have a replacement wiring harness, but the color codes seem to match original.
kiddcom is offline   Reply With Quote