Bill, I like the wireless lower plate. But there are two different ones available. I like the one that has a bent donut shaped brass spring plate attached to the steel bottom plate. There is a brass acorn nut that screws onto the points mounting stud on the bottom of the top plate. The other variety of wireless lower plate uses a flat donut brass plate mounted on the lower steel plate and there is a brass wiper that attaches to the points mounting stud. The wiper seems to be a bit too fragile to suit me. I prefer the first type, but either is an improvement over the original lower plate with the wire. I am usually more of a purist about restoring Model A's, but this is one change that is a big improvement and will not be detected without disassembly.



<table><tr><td><font face="arial">