The Ford Barn - View Single Post

700rpm · 10-10-2011, 06:20 PM

You can also remove the plugs and put a piece of rope part way down one of the cylinders; turn the engine over with the starter and the head should come loose. Don't do any prying around the edges with anything!

10-10-2011, 06:20 PM	#4
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 5,920	Re: Head Removal Tip Needed You can also remove the plugs and put a piece of rope part way down one of the cylinders; turn the engine over with the starter and the head should come loose. Don't do any prying around the edges with anything!