Re: KH Curve Spoke Wheels
You would need 1” wheel adapters for a Jeep to get to the 5.5” bolt pattern for the Kelsey’s.
They don’t sell the adapters for Fords because the studs stick out too far. You need to trim the studs. The Kelsey will fit over the 8” rear drums. You need the rings to support the inside of the wheel flange. I made the rings at one time. I run 5.5 bc wheels on my roadster with a 8” rear. Just for giggles, I tried a Kelsey on the car. It fit just fine.
|