The Ford Barn - View Single Post

Bob Bidonde · 08-13-2023, 07:28 AM

The "A" era factory technique is to tighten the nut until the bearing binds, then back-off the nut one or two notches until the bearing spins freely. Install the cotter pin.

08-13-2023, 07:28 AM	#2
Bob Bidonde Senior Member Join Date: May 2010 Location: Long Island, NY Posts: 3,498	Re: front wheel bearings The "A" era factory technique is to tighten the nut until the bearing binds, then back-off the nut one or two notches until the bearing spins freely. Install the cotter pin. __________________ Bob Bidonde